GIGABIT EPON Terminal – S-EP200

  • Support port-based rate limitation and bandwidth control
  • In compliant with IEEE802.3ah Standard
  • Up to 20KM transmission Distance
  • Support data encryption, group broadcasting,port Vlan separation, etc.
  • Support Dynamic Bandwidth Allocation (DBA)
  • Support ONU auto-discovery/Link detection/remote upgrade of software
  • Support VLAN division and user separation to avoid broadcast storm
  • Support power-off alarm function, easy for link problem detection
  • Support broadcasting storm resistance function
  • Support ACL and SNMP to configure data packet filter flexibly
  • Specialized design for system breakdown prevention to maintain stable system
  • Support software online upgrading EMS network management based on SNMP, convenient for maintenance

    Interface:-

    • PON Interface: 1 EPON optical interface, Meet 1000BASE-PX20+ standard Symmetric1.25Gbpsupstream/downstream, SC single- mode fiber Split ratio:1:64,Transmission distance 20KM.
    • User EthernetInterface: 1*10/100M auto-negotiation, 1*10/100/1000M auto-negotiation Full/half duplex mode, RJ45 connector, Auto MDI/MDI-X, 100m distance
    • Power Interface:12V DC Power supply

    Performance Parameters:-

    • PON Optical Parameter: Wavelength: Tx 1310nm, Rx1490nm, Tx Optical Power: -1~ 4dBm Rx Sensitivity: -25dBm, Saturation Optical Power: -3dBm Connector Type: SC, Optical Fiber: 9/125?m single-mode fiber
    • Data Transmission: Data Transmission Parameter, PON Throughput: Downstream 950Mbps; Upstream 930Mbps Ethernet: 100Mbps, 1000Mbps, Packet Loss Ratio:<1*10E-12 latency: <1.5ms
    • Business Capability: Layer 2 wire speed switching, Support VLAN TAG/UNTAG, VLAN conversion, Support Port-based speed limitation Support Priority classification, Support storm control of broadcast.

    Network Management:-

    • Management Mode: Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management.
    • Management Function: Status monitor, Configuration management, Alarm management, Log management.

    Indicator:-

    • LED Indicator: PWR: Power up or down, SYS: System instructions
    • OPTIN: Optical Link Status, LINK: ONU Registered
    • LAN: Link Status of Ethernet Interface

    Physical Features:-

    • Shell:  Plastic casing
    • Power: External 12V 0.5A AC/DC power supply adapter
    • Power consumption: <2W(),<2.3W(PL311HC)
    • Environmental Specifications
    • Operating temperature: -10 to 60 ºC
    • Storage temperature: -40 to 70 ºC
    • Operating humidity:10% to 90% (Non-condensing)
    • Storage humidity: 10% to 90% (Non-condensing)

4,500.00

Guaranteed Safe Checkout

Features & Compatibility

Description : GIGABIT EPON Terminal
Model No : S-EP200

Technical Specifications

Interface:-

  • PON Interface: 1 EPON optical interface, Meet 1000BASE-PX20+ standard Symmetric1.25Gbpsupstream/downstream, SC single- mode fiber Split ratio:1:64,Transmission distance 20KM.
  • User EthernetInterface: 1*10/100M auto-negotiation, 1*10/100/1000M auto-negotiation Full/half duplex mode, RJ45 connector, Auto MDI/MDI-X, 100m distance
  • Power Interface:12V DC Power supply

Performance Parameters:-

  • PON Optical Parameter: Wavelength: Tx 1310nm, Rx1490nm, Tx Optical Power: -1~ 4dBm Rx Sensitivity: -25dBm, Saturation Optical Power: -3dBm Connector Type: SC, Optical Fiber: 9/125?m single-mode fiber
  • Data Transmission: Data Transmission Parameter, PON Throughput: Downstream 950Mbps; Upstream 930Mbps Ethernet: 100Mbps, 1000Mbps, Packet Loss Ratio:<1*10E-12 latency: <1.5ms
  • Business Capability: Layer 2 wire speed switching, Support VLAN TAG/UNTAG, VLAN conversion, Support Port-based speed limitation Support Priority classification, Support storm control of broadcast.

Network Management:-

  • Management Mode: Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management.
  • Management Function: Status monitor, Configuration management, Alarm management, Log management.

Indicator:-

  • LED Indicator: PWR: Power up or down, SYS: System instructions
  • OPTIN: Optical Link Status, LINK: ONU Registered
  • LAN: Link Status of Ethernet Interface

Physical Features:-

  • Shell:  Plastic casing
  • Power: External 12V 0.5A AC/DC power supply adapter
  • Power consumption: <2W(),<2.3W(PL311HC)
  • Environmental Specifications
  • Operating temperature: -10 to 60 ºC
  • Storage temperature: -40 to 70 ºC
  • Operating humidity:10% to 90% (Non-condensing)
  • Storage humidity: 10% to 90% (Non-condensing)

Additional information

Customer Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.